IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 85)

76
Figure 4-82
4.7.1 HDD
Management
Here is for you to view and implement hard disk management. See Figure 4-83.
You can see current HDD type, status, capacity and record time. When HDD is working properly,
system is shown as O. When HDD error occurred, system is shown as X.
z
Alarm set: Click alarm set button, the interface is shown as below. See Figure 4-84. (This
interface is just like the abnormality setup). Please refer to chapter 4.7.2 for detailed
information.
z HDD operation: You can select HDD mode from the dropdown list such as read-only or you
can erase all data in the HDD. Please note system needs to reboot to get all the modification
activated.
Figure 4-83