IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder User Manual
Page 48
39
z
DST: Here you can set DST time and date. Please enable DST function and then click set
button. You can see an interface is shown as in Figure 4-22. Here you can set start time and
end time by setting corresponding week setup. In Figure 4-22, enable date button, you can
see an interface is shown as in Figure 4-23. Here you can set start time and end time by
setting corresponding date setup.
z
Time format: There are two types: 24-hour mode or 12-hour mode.
z
Language: System supports various languages: Chinese (simplified), Chinese (Traditional),
English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight
difference maybe found in various series.)
z
HDD full: Here is for you to select working mode when hard disk is full. There are two options:
stop recording or rewrite. If current working HDD is overwritten or the current HDD is full while
the next HDD is no empty, then system stops recording, If the current HDD is full and then
next HDD is not empty, then system overwrites the previous files.
z
Pack duration: Here is for you to specify record duration. The value ranges from 60 to 120
minutes. Default value is 60 minutes.
z
Device No: When you are using one remote control (not included in the accessory bag) to
control several NVRs, you can give a name to each NVR for your management.
z
Video standard: There are two formats: NTSC and PAL.
z
Realtime play: It is to set playback time you can view in the preview interface. The value
ranges from 5 to 60 minutes.
z
Device ID: Please input a corresponding device name here.
z
Holiday setting: Click it you can see an interface shown as in Figure 4-24. Here you can set
holiday date. Please go to the Holidays Period interface to set the holiday date record setup.
When you enable Holiday settings and schedule setup at the same time, holiday setting
has the priority. If the selected day is a holiday, then system records as you set in holiday
setting. If it is not a holiday, system records as you set in Schedule interface. Please note
you need to go to chapter 4.6.3 Schedule to enable Holiday setup. Otherwise you can not
enable holiday record setup.
Please note, there is no year setup on the holiday setting. For example, if you set 30th
Oct, 2012 as a holiday, then the date of 30th Oct in each year will be set as a holiday. So,
general speaking, your holiday setup in other year may also affect the holiday setup in
2012.
z
Mouse property: Click mouse setup button, you can go to mouse setup interface. See Figure
4-25. You can set double click speed via dragging the slide bard. You can Click Default
button to restore default setup.
z
Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.
z
Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
z
Navigation bar: Check the box here, system displays the navigation bar on the interface.
z
IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.
z
Snap times: Here you can set snap picture amount of one click.
Note:
Since system time is very important, do not modify time casually unless there is a must!
Before your time modification, please stop record operation first!
After completing all the setups please click save button, system goes back to the previous menu.