IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 31)

22
3.3 NVR708X2/ NVR716X2/ NVR732X2 Series
① Use the screwdriver to loose the screws of the rear panel and then remove the front cover.
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.
4. Turn the device upside down
and then turn the screws in
firmly.
5. Fix the HDD firmly.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the rear
panel and the side panel.