CatEye EC-3600 - Manual (Page 52)

Cateye Ergociser Series 1000 Service Manual
50
EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models:
MS-13
MS-13
Fig.2
Fig.1
Rear Support Pipe
Insertion Area
Replacing the Vertical Pipe Spacer
1. Remove the seat hite lock knob, and pull out the rear support
pipe.(Fig. 1)
2. Remove the rear support pipe spacer at the rear support pipe
insertion area on the top surface of the seat pipe. The rear
support pipe spacer is fixed on the pipe with an adhesive tape.
3. Apply and set a brandnew rear support pipe spacer with an
adhesive tape.(Fig. 2)
4. Insert the rear support pipe, and fix it with the seat hite lock
knob.
Seat Hite Lock Knob
Rear Support Pipe
Replacing the Vertical Pipe Spacer
Rear Support Pipe Spacer