Interlogix NX-4V2 User Manual User Manual
Page 17
NX-4V2 LED Keypad User Manual
13
another reset. If the keypad still beeps after repeated attempts, please
contact your installer.
Set system date
1. Press the [
∗
]-[9]-[6].
2.
Enter the “Master Code”.
3.
Enter the “Day of Week “
1 = Sunday 3 = Tuesday 5 = Thursday 7 =Saturday
2 = Monday 4 = Wednesday 6 = Friday
4.
Enter the “Month Code”. Must always be two (2) digits.
01 = January 05 = May 09 = September
02 = February 06 = June 10 = October
03 = March 07 = July 11 = November
04 = April 08 = August 12 = December
5.
Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
th
would be entered as [0]
–[5].
6.
Enter the last two digits of the “Year Code”.
Example: For 2007 enter [0]
–[7].
Setting the system
1. Press [
∗
]-[9]-[7].
2.
Enter the “Master Code “.
3.
Enter the “hour code” which must be two (2) digits. Note: The clock is a 24-
hour clock. Refer Table 4 below.
4.
Enter the “minutes code” which must be two (2) digits.
Example: 7 minutes after would be entered [0]
–[7].
Table 4: Hour codes
Time
Hour code
Time
Hour code
Time
Hour code
12:00 Midnight 00
8:00 AM
08
4:00 PM
16
1:00 AM
01
9:00 AM
09
5:00 PM
17
2:00 AM
02
10:00 AM
10
6:00 PM
18
3:00 AM
03
11:00 AM
11
7:00 PM
19
4:00 AM
04
12:00 Noon
12
8:00 PM
20
5:00 AM
05
1:00 PM
13
9:00 PM
21