Interlogix NX-4V2 User Manual - Manual (Page 6)

2 NX-4V2 LED Keypad User Manual
Introduction
THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR
SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL
USERS OF YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE
INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET. FAILURE TO DO
SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING
PROPERLY. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE
LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT
UNDERSTAND ANY PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR
INSTALLING COMPANY.
The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by
entering a 4 or 6 digit code into the Keypad Control, which is similar to a
telephone keypad. If your Security Control has been so programmed, you may
be able to turn on (ARM) your System by simply pressing the [STAY] or [EXIT]
key. The system must always be disarmed using a 4 or 6 digit code. The LED
keypad includes up to 35 lights and a built-in electronic sounder. These provide
specific information relating to the status of the security system which is
described in the booklet. Understanding what the lights and sounds mean will
help you to easily operate your system.
READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE
KEYPAD CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE.
KEEP IN MIND, THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS
SYSTEM RELATES SPECIFICALLY WITH TWO MAJOR FACTORS:
1. The quantity, quality, and placement of security devices attached to this
system.
2. The knowledge you have of the security system and how that knowledge is
utilized in a weekly test of the complete system.
YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING
A SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.
• Your security system is an electronic device and is subject to failure or
malfunction. Do not rely on it as your single source of security.
• Your system should be tested weekly.
• Your system will not work without power.
• Warning devices will need to be loud enough, wired correctly, and properly
placed to provide notification of an alarm event.
• Smoke and heat detectors may not detect heat and smoke in all situations.
• Use qualified security professionals to install and maintain your security
system.
• It may be possible to arm the security system without the backup battery
connected. Your periodic test should be done with A.C. Power removed to
verify the battery is connected and adequately charged.