Interlogix NX-6V2 User Manual User Manual

Page 4

Advertising
background image

2

THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM
AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY
SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN
THIS BOOKLET. FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT
WORKING PROPERLY. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE
LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND
ANY PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR INSTALLING COMPANY.

The SECURITY CONTROL can be turned on (ARMED) and of f (DISARMED) by entering a 4
or 6 digit code into the Keypad Control, w hich is similar to a telephone keypad. If your
Security Control has been so programmed, you may be able to turn on (ARM) your
System by simply pressing the [STAY] or [EXIT] key. The sys tem must alw ays be
disarmed using a 4 or 6 digit code. The LED keypad includes up to 35 lights and a built -in
electronic sounder. These provide specific information relating to the status of the
security system w hich is described in the booklet. Understanding w hat the lights and
sounds mean w ill help you to easily operate your system.

READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE KEYPAD
CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE.

KEEP IN MIND, THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS SYSTEM
RELATES SPECIFICALLY WITH TWO MAJOR FACTORS:

1.

The quantity, quality, and placement of security devices attached to this system.

2.

The know ledge you have of the security system and how that know ledge is
utilized in a w eekly test of the complete system.



YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING A
SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.

Your security system is an electronic device and is subject to failure or malfunction.
Do not rely on it as your single source of security.

Your system should be tested w eekly.

Your system w ill not w ork w ithout pow er.

Warning devices w ill need to be loud enough, w ired correctly, and properly placed
to provide notification of an alarm event.

Smoke and heat detectors may not detect heat and smoke in all situations.

Use qualified security professionals to install and maintain your security system.

It may be possible to arm the security system w ithout the backup battery connected.
Your periodic test should be done w ith A.C. Pow er removed to verify the battery is
connected and adequately charged.

Care should be taken to plug in and restrain the A.C. Transformer after testing.



PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS CAREFULLY
BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM. IF YOU DO NOT
UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF YOU HAVE ANY QUESTIONS
ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY LISTED ON PAGE 1
OF THIS BOOKLET.

Advertising