Interlogix TVE Series - Manual (Page 24)

20 TVE-400/800-1600 H.264 IP Video Encoder User Manual
If the status of the network disk is Uninitialized, select the disk and click Init to
start initializing it. When the initialization is complete, the disk status becomes
Normal.
Note: Up to 8 NAS or IP SAN disk can be connected to the encoder.
6. Set the property of the added network disk.
Select the HDD number. Select its property from the drop-down menu: R/W,
Read-only or Redundancy.
Note: Please refer to the IP SAN/NAS user manual on how to create a file
path in network management.
To configure SNMP protocol settings:
1. Click the Device Configuration > Network Settings > SNMP Settings. The
SNMP Settings window appears.
2. Enter the NIC port value. The default value is 161.
3. When SNMPv1 and/or SNMP v2c are enabled, you can configure the read
SNMP community (default: public), write SNMP community (default: private),
tap address (default: empty) and trap port (default: 162).
4. When SNMPv3 is enabled, you can configure the read user name (default:
public).
Note: SNMPv1, SNMP v2c and SNMPv3 are disabled by default.
5. Select the security level:
“no auth, no priv”, “auth, no priv”, “no auth, priv” or
“auth, priv”.