Interlogix TVE Series - Manual (Page 28)

24 TVE-400/800-1600 H.264 IP Video Encoder User Manual
Motion detection
The encoder can be set up to trigger an alarm if it detects motion and to record it.
You can then search these recorded motion activities for specific incidents.
Select the level of sensitivity to motion so that only objects that could be of
interest can trigger a motion recording. For example, recording is triggered by
the movement of a person but not that of a cat.
To configure motion detection:
1. Click Configuration > Camera Settings > Motion detection. The Motion
Detection window appears.
2. Select a camera from the drop-down list. Each camera must be set up
individually.
3. Check Enable Motion Detection .
4. Select the area sensitive to motion and the sensitivity level.
Click Start Draw . Click and drag the mouse cursor across the screen. The
area selected appears as a red grid. Areas covered by the red grid are
sensitive to motion detection. Up to eight areas can be drawn. Click
Stop
Draw when completed. Click Clear All to clear the screen.
Drag the Sensitivity scroll bar to the desired sensitivity level. The highest
value is on the right of the bar.
Click Save to save the settings.
5. Select the recording schedules for motion detection.
Click the Arming schedule tab. Click Edit .