Interlogix TVE Series - Manual (Page 6)

2 TVE-400/800-1600 H.264 IP Video Encoder User Manual
Product description
Figure 1: Front panel
Tx/Rx POWER Encoder
LED Description
POWER The LED lights up red when the device is working. It is not lit when the device is
powered down.
TX/RX The LED is not lit when there is no network connection.
It lights up green and flashes when data is being transmitted/received.
It flashes at a faster rate when a large amount of data is being transmitted or
received.
Figure 2: Back panel
4-channel:
        
8-channel:
        
16-channel:
        
Item Name Description
1. 12 VDC Connect a 12 V power supply via a PSU.
2. RS-485 Connect a PTZ camera or dome camera to the RS-485 serial port.
3. Alarm Out Connect up to two alarm relay outputs.
4. Alarm In Connect up to six alarm relay inputs.