Interlogix TVE Series - Manual (Page 36)

32 TVE-400/800-1600 H.264 IP Video Encoder User Manual
4. Click the Start Draw buton to start drawing an area.
5. Using the mouse, click and drag a privacy-mask box in the camera view
screen over the desired area. You can set up to four areas for privacy
masking.
6. Click the Stop Draw button to stop drawing.
Note: Click the Clear All button to clear all mask areas.
7. Click Save to save the settings.
RS-485 settings
The RS-485 serial port is used to control the PTZ of the camera. The PTZ
parameters need to be configured before you control the PTZ unit.
To configure a privacy mask:
1. Click Device Configuration > Serial Port Settings > RS-485. The RS-485
window appears.
2. Enter the RS-485 parameters. The default parameters are:
Baud rate: 9600
Data bit: 8
Stop bit: 1
Parity: None
Flow control: None
PTZ protocol: A-01
Address: 0
Note: It is important to ensure that the settings correspond with those used in
the PTZ camera.