Interlogix TVE Series - Manual (Page 33)

TVE-400/800-1600 H.264 IP Video Encoder User Manual 29
2. Select a camera to configure for video loss detection.
3. Check the Enable Video Loss box.
4. Under the Arming Schedule tab, click Edit to modify the arming schedule for
video loss detection. The configuration is the same as that for the arming
schedule for motion detection. See page 24 for further information.
5. Select the Linking Method tab. Then select the response method to notify
you of the alarm.
6. Click Save to save the settings.
Tamper-proof alarm
Video tampering, such as moving a camera to a different position, can also be
detected and set to trigger an action on the encoder.
Note: It is strongly recommended not to configure for video tampering when
using PTZ dome cameras.
To configure video loss detection:
1. Click Device Configuration > Camera Settings > Tamper-Proof. The
Tamper-Proof Settings window appears.