Interlogix DVR 41 User Manual - Manual (Page 115)

TruVision DVR 41 User Manual 109
Chapter 12
Network settings
You must configure your DVR’s network settings before using it over the network.
The DVR must have access to the internet when configuring the network
settings.
Note: As every network configuration may differ, please contact your Network
Administrator or ISP to see if your DVR requires specific IP addresses or port
numbers.
Configuring general network settings
To configure general network settings:
1. Click the Network settings icon in the menu toolbar to display its screen.
2. Click General and enter the required settings:
Option Description
NIC type Network interface card (NIC) is a device used to connect the
DVR to a network. Select the NIC type used from the drop-down
list.
Default value is 10/100/1000M self-adaptive.