Interlogix DVR 41 User Manual - Manual (Page 128)

12BChapter 13: HDD management
122 TruVision DVR 41 User Manual
4. Select a camera whose storage capacity you want to change and enter the
values in GB for maximum record capacity and maximum picture capacity.
The maximum storage capacity of the HDD is listed.
5. Click Apply to save the settings.
6. If you want to copy these values to other cameras, click Copy and select the
cameras. Click OK . Click Apply to save the settings.
Setting up HDD groups
Your DVR can organize multiple HDDs into groups. Videos from specified
channels can be set to be recorded onto a particular HDD group. You could, for
example, save the records from a couple of high priority cameras to one HDD,
and save the recordings from all the other cameras to another HDD.
To set up a HDD group:
1. Click the System Settings icon in the menu toolbar and select Hard Disk .
2. Select the Storage Mode tab.
3. Under Mode , select Group .
4. Under Record on HDD Group , select the HDD group number.
5. Check the channels to be added to this group.
Note: By default, all channels belong to HDD group 1.
6. Click Apply to save the settings.