Interlogix DVR 41 User Manual - Manual (Page 51)

5BChapter 6: Controlling a PTZ camera
TruVision DVR 41 User Manual 45
Item Name Description
5. Select PTZ command Displays the desired function from the scroll bar: camera, preset,
preset tour or shadow tour.
6. Open/close menu Opens/closes the PTZ command section of the PTZ control
panel.
7. Exit Exits the PTZ control panel.
Setting and calling up presets
Presets are previously defined locations of a PTZ dome camera. It allows you to
quickly move the PTZ dome camera to a desired position. They are configured
and modified from the PTZ configuration window (see Figure 22 below).
Note: The PTZ dome camera used must be able to support a preset command.
See Appendix F on page 165 for the complete list of PTZ commands available by
camera protocol.
Figure 22: PTZ configuration window
Table 15: Description of the PTZ configuration window
Item Name Description
1. Save preset Saves preset.
2. Call preset Calls up pre-existing preset.
3. Shadow tour toolbar Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Deletes the selected shadow tour.