Interlogix DVR 41 User Manual - Manual (Page 165)

20BAppendix D: Port forwarding information
TruVision DVR 41 User Manual 159
5. Press to activate the dropdown menu.
6. Press and hold esc and then press the up/down arrow buttons to navigate to
the desired option.
7. Press to select the option.
8. Press and hold esc and then press the up/down arrow buttons to navigate to
Apply. Press to select it. Then navigate to Back to return to live view.
Instead of the arrow buttons, you can also use the joystick on the keypad.
TVR 41 mapping to the KTD-405 keypad
Table 22: TVR 41 mapping to the KTD-405 keypad
Task Keypad action Further information
 Menu mode
Call up or exit menu In live view, press esc. To logout of the menu: go to the
Power Manager menu and select
Logout.
Move through the menus Press and hold esc and
then press the arrow
buttons or use the joystick.
Down, Up, Left,
Right
Move between menu tabs Press Zoom + or Zoom - to
switch between menu tabs.
Navigate to a menu option Press and hold esc and
then press the arrow
buttons.
Down , Up , Left ,
Right
Select a character or menu
option Press Enter ( ). Note. If you press esc before
pressing Enter , you quit the
menu without saving any
changes. It is the same as
cancel.
Select the zone ID Press zone to connect the
keypad to the DVR.
 Live view mode
Call up a single camera Press 0 to 9 and then press
Enter ( ).
Using the numeric buttons 0 to 9 ,
enter the number of the camera
and then press
Enter ( ).
Call up multiview screens Press view and then
continue to press button 5
to scroll through the options
available.
Sequence through cameras Press the seq button to
scroll through the cameras
in full screen.
Switch to next/previous
camera Move the joystick to the
right (= next camera), or the
left (= previous camera)