Interlogix DVR 41 User Manual - Manual (Page 118)

11BChapter 12: Network settings
112 TruVision DVR 41 User Manual
Configuring an NTP server
A Network Time Protocol (NTP) server can also be configured on your DVR to
keep the date and time current and accurate.
Note: If the device is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44) or europe.ntp.pool.org. If the
device is setup in a more customized network, NTP software can be used to
establish a NTP server used for time synchronization
To set up an NTP server:
1. Click the Network settings icon in the menu toolbar.
2. Click NTP to display its screen.
3. Check the NTP box to enable feature. It is enabled by default.
4. Enter the NTP settings:
• Interval: Time in minutes to synchronize with the NTP server. The value
can be between 1 and 10080 minutes. Default is 60 minutes.
• NTP server: IP address of the NTP server.
• NTP port: Port of the NTP server.
5. Click Apply to save the settings.
Configuring e-mail
Your DVR can send e-mail notifications of alarms or notifications through the
network. The e-mail includes an HTML link. Click the link to play the video file
showing the alarm or notification.
Note: Ensure that the DNS address has been set up correctly beforehand.
To configure e-mail settings:
1. Click the Network Settings icon in the menu toolbar.
2. Click E-mail and enter the required settings.
Option Description
Enable server
authentication Check the box if your mail server requires authentication, and
enter the login user name and password.
SMTP server Enter the SMTP server’s IP address.
SMTP port Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL Check the box to enable SSL if it is required by the SMTP
server. This feature is optional.
Sender Enter the name of the sender of the e-mail.
Sender’s address Enter the sender’s e-mail address.