Interlogix DVR 41 User Manual - Manual (Page 45)

4BChapter 5: Live view
TruVision DVR 41 User Manual 39
Table 11: Description of the time and date settings screen
Option Description
Time zone Select the time zone of the DVR from the drop-down list.
Date format Select the date format from the drop-down list. Default format is DD-
MM-YYYY.
Time format Select the time format from the drop-down list. Default format is 24-
hour format.
Display week Display the day of the week in the monitor time bar.
Check the box to enable/disable. Default format is Disable.
System date Define the system date.
Default date is the current date.
System time Define the system time.
Default time is the current time.
Auto DST adjustment Define DST is automatically. It depends on the time zone selected.
Default format is Disable
Enable DST Manually define DST. If this option is selected, the Auto DST
adjustment option is disabled.
Default format is Disable.
Click the check box to enable or disable daylight savings time
(DST).
From Enter the start date and time for daylight savings.
To Enter the end date and time for daylight savings.
DST bias Set the amount of time to move DST forward from the standard
time.
Default is 60 minutes.
To set up the system time and date:
1. Click the Display Mode Settings icon in the menu toolbar.
2. Select Time . Modify the required settings.
3. Click the Apply button to immediately implement the changes.
General settings
Use the Display mode settings menu to configure general DVR options on how
information is displayed and accessed such as:
• Change GUI language
• Change the DVR name and address
• Define the monitor resolution
• Enable/disable the login password requirement
• Enable/disable the wizard