Interlogix DVR 41 User Manual - Manual (Page 75)

Chapter 9: Archiving recorded files
TruVision DVR 41 User Manual 69
8. Under Device Select , select the backup device used.
9. If you change any options, click Refresh .
10. Click Apply .
Creating and archiving video clips
You can save important scenes in a recorded file for later reference by creating
video clips of selected portions of the file during playback. When an intruder, for
example, crosses in front of several cameras you can save the video clip of the
intruder’s path across these cameras in a single file.
Up to 30 video clips can be made from a recording.
Note: This feature is only available using the mouse.
To manually export video clips during playback:
1. Connect the backup device to the DVR.
2. Search for the required files to play back. See “Searching recorded video” on
page 56.
3. Select the file or files to play back and click Play . Playback starts
immediately.
4. Click the playback timeline where you want the video clip to start and click the
Start Clip button.
5. Click the playback timeline where you want the video clip to stop and click the
End Clip button.
6. Repeat for additional clips.
7. Exit playback mode. A message appears asking if you want to save the video
clips.
8. Click Yes to archive the clips. The Export screen appears.
Click No to exit and return to the search results screen. The clips are not
saved.
9. In the Export screen select from the drop-down list the backup device to be
used.
10. Click Start . File downloading starts.
Note: You can create a new folder for the video clips. Press the New Folder
button and enter the folder name.
Archiving snapshots
You can save all the video snapshots recorded to a backup device.