Juniper Systems Barcode Expansion Pod - Manual (Page 3)

Bar Code Expansion Pod

scanned bar code can be transferred to any application
program on your Field PC.
The Bar Code Reader has the following options available:
Help
Begin Scan
Bar Code Setup
Exit
The Help option on the Bar Code Reader title bar opens a
drop down menu with an About option. Tapping on the
About option accesses a pop up screen showing the Bar
Code Reader version number and copyright.
The Begin Scan button enables the expansion pod to being
scanning bar codes. It takes scanned data and enters it
into an opened data collection program on your Field
PC. The Begin Scan wedges the bar code scan into your
running application.
The Bar Code Setup button opens the Bar Code Setup
program. This setup contains selectable options to set up
the scanner to operate according to your needs.
The Exit button at the bottom of the program screen closes
the Bar Code Reader program.
To begin using your Field PC’s Bar Code Expansion Pod,
follow the instructions under the Getting Started, Bar Code
Setup, and Begin Scan.



