Juniper Systems Barcode Expansion Pod - Manual (Page 5)

Bar Code Expansion Pod

throughout this section.
The Bar Code Setup program can be personalized using
the following options:
User
Scanner
Data Format
Code Type
Defaults
The Bar Code Setup program has many options that are
enabled and disabled by tapping on small boxes next
to the option. When an option is selected, a checkmark
appears in the box. When the option is disabled, the
checkmark disappears.
To set up and save your bar code scanning options,
complete the following steps:
1.
Read the following set up sections: User, Scanner, Data
Format, Code Type, and Defaults.
These sections describe the functions in the Bar Code
Setup program informing you of the options that best
suit your bar code scanning needs.
2.
Select the settings you want to scan bar codes.
3.
Tap on the Exit Setup button to save your bar code
settings and return you to the Bar Code Reader screen.
4.
Go to Begin Scan section of this chapter and follow
the directions there to begin scanning bar codes.




