Juniper Systems Barcode Expansion Pod - Manual (Page 6)


Bar Code Expansion Pod
User setup
The User tab contains the options that effect how you use
and interact with the bar code scanning program. These
options include targeting and scanning key selections,
and audio and visual confirmation if a scan is successful
or not.
To target bar codes, the scanner emits a small laser beam
showing a red dot where the scan takes place. This target
beam allows you to line up the scanner with the bar code.
To scan bar codes, the scanner emits a laser as a thin red line
that covers the entire length of a bar code. In the scanning
process, the bar code is read, decoded, and then transferred
to a data collection program open on your Field PC.
The User tab allows you to select which key your Field PC
uses to initiate a scan, and if you want audio and/or visual
confirmation is a scan is successful or not.