Juniper Systems LandMark Mobile - Manual (Page 35)

LandMark Mobile User’s Manual 5
The Configuration screen contains seven tabs, GPS, File, Data,
Units, Mask, HotKeys, and Keyboard. This section covers the
options available in each one of these tabs.
To use the Configuration screen via the keyboard, use the tab keys
(forward or back tab), or the circular navigation key. To exit the
Configuration screen, tap OK in the top right hand corner of the
screen, which will also automatically save all your configuration
changes.
Note: Tapping on the OK in the upper right hand corner saves any
configuration changes you have made.
GPS Tab
The GPS tab is used to configure the COM port you are using to
attach the GPS receiver. Any changes to the communication port
become effective immediately, a program restart is not needed.