Juniper Systems LandMark Mobile - Manual (Page 49)

LandMark Mobile User’s Manual 49
When New is tapped, a pop-up screen appears.
Change the Waypoint ID and fill in latitude, longitude, and
elevation. The units format depends on what is selected in the
configurations screen. (See Configuration instruction to change
Units format.)
Waypoint #
Waypoint # is the number assigned by LandMark Mobile. All
points in a waypoint file are numbered consecutively.
Waypoint ID
Waypoint ID is the point name that you give to a point.
Latitude
Latitude shows the waypoint latitude.
Longitude
Longitude shows the waypoint longitude.
Elevation
Elevation shows the waypoint elevation.
When you are finished entering all fields, tap on the OK button to
go back to the Waypoint screen. All of your point information is
saved into the waypoint file when you tap on OK.