Juniper Systems LandMark Mobile - Manual (Page 53)

LandMark Mobile User’s Manual 5
Store WPT
The Store WPT (Store Waypoint) button is used to store an average
waypoint in the current waypoint file. If the Store WPT button
is pressed before the Average button (if the button is available),
the averaging process begins automatically and continues until
all points for the average have been obtained. After the point is
averaged, it is stored in the waypoint file.
In both cases, after the averaged waypoint is stored, the Mark
Point screen closes. The new waypoint is included in the list of
waypoints on the left side of the Waypoint screen.
Export
The Export button starts the average function, and then exports
the averaged point to your Waypoint Data Path (See Configuration/
File to set up Waypoint Data Path).
Note: When the waypoints file reaches the 256 point limit, the Export
button can still be used to export data to another application, but a new
waypoint file must be created if additional points are stored.
Cancel
Tapping the Cancel button closes the Mark Point screen.