Canon FS 3.6 - Manual (Page 120)

120
Appendices
Configuring CanoCraft FS
It may be necessary to configure CanoCraft FS if
the scanner was incorrectly attached or the power
was off while CanoCraft FS was being installed or
if the message to the right displays and prevents
CanoCraft FS or CanoCraft FS Copy from scanning.
The configuration process can be conducted with the [Automatic Configuration]
setting or the [Configuration] setting, which allows you to confirm each stage of
the process.
• To run the configuration process, ensure that the scanner is correctly
attached and turned on before Windows is started.
CanoCraft FS Automatic Configuration
This setting allows CanoCraft FS to automatically configure its settings to operate
correctly with the scanners and printers connected to the computer.
Procedures
Double-click the [CanoCraft FS Automatic Configuration] icon.
The configuration complete message will display after a moment.
Read the message and click the [OK] button.
If this window is not displayed, click the [Start] button on the
Windows taskbar and select [Programs] and [CanoCraft FS].