Canon FS 3.6 - Manual (Page 35)

35
Right-click the settings display area
Highlight an option and click
The current selection will have
a check mark beside it
Output Magnification Box at the
Top of the Preview Window
Click here and
select [%].
Enter a value directly in this box
Raises the magnification
Lowers the magnification
Selecting the [Custom] option
displays the Custom Magnification
Settings dialog, allowing you to
directly input a custom value.
Step 2 • Scanning
Procedures for Setting the Output Resolution
Select the output resolution best suited to your intended print and monitor sizes.
Select a setting by right-clicking the settings display area, highlighting an option
with the mouse cursor and clicking it. When the menu disappears, the new value
will appear in the settings display area.
To change the setting with the output magnification box at the top of the preview
window, set the units to [%] and click the up or down arrows or input a value
directly into the box.
• Changing the scan resolution enables you to select [Custom] in the output
magnification pop-up menu.