Canon FS 3.6 - Manual (Page 70)

70
Exposure Adjustment Dialog
Click the [Settings] menu and select [Exposure].
Drag the slider left or right or click
the arrow buttons to adjust the
exposure setting. The setting is
enabled when the auto color
adjustment setting is set to off.
Cancels any adjustments and closes the dialog.
Accepts the adjustments and closes the dialog.
Click here to turn the
auto color adjustment
setting on or off. A
check mark will appear
in the box when it is
set to on.
Adjusting the Exposure Settings
You can manually adjust the exposure setting (scan speed) for film that has been
intentionally over- or underexposed or that has an extremely bright or dark
background.
• The auto color adjustment function is turned off when the exposure setting
is adjusted. The default setting for the auto color adjustment function is
‘on’ so that the scanner can automatically adjust the exposure to the film
type.
• With CanoScan FS2710, only the exposure needs to be adjusted. Both the
exposure and the film type settings need to be adjusted with CanoScan
2700F. In addition, the exposure settings for color positives cannot be
adjusted with CanoScan 2700F.
• The film type is determined by the manufacturer and product. Please refer
to the List of Film Types to set the film type setting (CanoScan 2700F only).
Exposure Adjustment Dialog
Set the auto color adjustment setting to off and set the exposure by dragging the
slider.