Canon FS 3.6 - Manual (Page 74)

74
Other Functions
CanoCraft FS Preference Settings
The preference settings control CanoCraft FS’s automated routines for scanning
and closing.
Save Preview Image
Placing a check in this option causes CanoCraft FS to save the last image in the
preview window at shut down. At the next startup, the image automatically
appears in the preview window. This option is set to off when CanoCraft FS is first
installed.
Single Scan
Placing a check in this option closes CanoCraft FS after it scans one image when
started as a TWAIN driver from within a TWAIN-compliant application. This option
is set to off when CanoCraft FS is first installed.
Auto Eject
Placing a check in this option causes the scanner to automatically eject the film at
the end of the scan. This option is set to on when CanoCraft FS is first installed.
• Auto eject only ejects the film after the final scan, not after a preview scan.
Set the Exposure and Autofocus Settings for Final Scan
The exposure and autofocus settings are usually set automatically to the
appropriate settings during the preview scan. If the preview scan is
skipped, however, these settings are not set and the results may not be
appropriate. Set this option to On to have the settings automatically set
during the final scan when you wish to skip the preview step.
Click an option to place a check mark
in its box and activate the setting.
Click the [Settings] menu and
select [Preferences].
Preferences DIalog