Canon FS 3.6 - Manual (Page 63)

63
Adjusting Gamma Values (Expert Mode)
In expert mode, the gamma values of the display can be adjusted to 24-Bit Color,
36-Bit Color, 8-Bit Grayscale and 12-Bit Grayscale images. This method is suitable
for realizing colors on the monitor that are more closely matched to the original
image.
Gamma Value Tab
Click the one of the preset gamma value check boxes or click [Custom] and change
the settings with the slider or by directly inputting values into the boxes. You can
save and reload the settings.
Click the [Image] menu and
select [Adjust] or click the
[Adjust] button.
Gamma Value Tab
Click the Gamma Value Tab and select
a gamma value.
Step 3 • Adjusting Images
Clicking this box allows you
to select a custom value.
Drag the slider tab left or
right or click the arrows to
change the value.
Click a checkbox to select a
preset gamma value.
With the [Custom] box
selected, set the gamma
value within a range of 0.10
to 10.00. The value will
change as the slider is moved.
You can also input a value
directly into the box.
Loads settings from files with
the extension [.adc] for color
images or [.adg] for grayscale
images.
Saves settings to a file with
the extension [.adc] for color
images or [.adg] for grayscale
images.
Cancels the settings and closes the dialog.
Accepts the settings and closes the dialog.
Resets all the settings to the initial values.
Restores the gamma value to its initial setting.