Canon FS 3.6 - Manual (Page 29)

29
Step 2 • Scanning
Right-click the settings display area.
Click the [Settings] button or
[Settings] menu and [Film Type]
submenu.
Select from these options for 35 mm film.
For mounted slides, select the 35 mm color
positive setting.
Select from these options for IX240 film.
A check mark will appear beside the current selection
in this menu.
Selecting the Film Type
It is important to select the correct film type in the film type settings menu to
obtain the correct color balance in the scanned image.
Position the mouse cursor over an option and click to select it. The menu will close
and the new selection will appear in the settings display area.
• If you are scanning several films of the same type consecutively, this setting
need only be set the first time.
• If the setting is saved, it can be used thereafter until it is changed.
• The current setting is displayed in the settings display area on the control
panel.