Canon FS 3.6 - Manual (Page 54)

54
Step 3 • Adjusting Images
Click the [Image] menu and select either
[Easy Mode] or [Expert Mode].
The current selection will
have a check mark beside it
Highlight the desired adjustment mode
and click it.
Changing the Adjustment Mode
The method for adjusting brightness and coloring can be set to either easy mode
or expert mode. In easy mode, you can adjust the brightness and coloring (only
brightness is changed for grayscale images and threshold values for black and
white images) by looking at and selecting samples proposed by CanoCraft FS. In
expert mode, you adjust them with various image processing functions.
Easy Mode Categories
Brightness (24-Bit Color/8-Bit Grayscale)
Color Balance (24-Bit Color/36-Bit Color)
Threshold (Black and White)
Expert Mode Categories
Histograms (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Brightness/Contrast (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Gamma Values (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Tone Curves (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Color Balance(24-Bit Color/36-Bit Color)
Threshold (Black and White)
• If you are new to color correction, please ensure that you read the
instructions in this manual thoroughly before you attempt the expert mode.
Set the adjustment mode by clicking the [Image] menu and selecting an option.