Canon FS 3.6 - Manual (Page 15)

15
Step 1 • Basic Procedures
Installing CanoCraft FS
Installing CanoCraft FS
After you have finished attaching the CanoScan FS2710 or 2700F film scanner to
your computer, install the CanoCraft FS program with the following procedures.
Turn the scanner and computer power on in that order.
Place the software CD-ROM that accompanied the scanner into the
computer drive.
Click the [Install/Uninstall Software] option in the CD-ROM menu and
select [Canon CanoCraft FS] and [CanoCraft FS] in succession.
Follow the on-screen instructions to complete the remaining steps.
Minimum computer system requirements for installing CanoCraft FS:
CPU: Windows ® 95 486 or higher
Windows ® 98 MMX Pentium or higher
Windows ® NT Pentium or Higher
Hard Disk: 50 MB or more
Main Memory (RAM): Windows ® 95 16 MB or more
(32 MB or more recommended)
Windows ® 98 32 MB or more
(64 MB or more recommended)
Windows ® NT 24 MB or more
(40 MB or more recommended)
Display: 256 colors or more (65,000 or more recommended)
Other: CD-ROM drive
• If you are using an old version of CanoCraft FS, version 3.1 or 3.5, ensure that
you delete (uninstall) it before you install version 3.6.
(p. 118)
• Confirm that the scanner is correctly attached to the computer and always turn
on the scanner and computer in that order before starting Windows.
• At least 50 megabytes of free space are required on the disk to which the program
is being installed (5 megabytes for the application program and 45 megabytes for
image files).
• CanoCraft FS 3.6 is for exclusive use with CanoScan FS2710/2700F film scanners.
This program is not compatible with other Canon flatbed or sheet-fed scanners.