Canon FS 3.6 - Manual (Page 17)

17
Step 1 • Basic Procedures
If your is the new version of Windows® 95, click the [Next] button without
inserting anything into the drive. In the next window that displays, click the
[Finish] button.
After you start Windows® 95, the
scanner will display under the
[Other Device] category. This is not a
problem because CanoCraft FS is
equipped with its own specialized
driver for Canon film scanners.
• If the following message displays during installation, there is insufficient
free space on the hard disk to install CanoCraft FS.
• Delete files off the disk to free sufficient space or change the drive setting
to one with sufficient free space. (see previous page)