Candle KLVHSKONCT GC32-9172-00 User Manual
Page 197
KM2EXPFF–KMCRCA002I
197
KMC0247E
The remote queue
@1
is not defined as USAGE(XMITQ) within the Queue
Manager.
Explanation: You defined a remote queue, but the transmit queue is empty and
the remote manager name identifies a local queue which is defined with
Usage=Normal.
User Response: Specify the name of a local queue defined within this Queue
Manager which is defined with Usage=Transmit for the remote manager name. If
an application opens the local definition of a remote queue, the remote Queue
Manager must not be blank or the name of the local Queue Manager. When the
open occurs, if the transmit queue is blank there must be a local queue of this
name, which is to be used as the transmission queue.
KMC0248W
The process is not referenced by a local or model queue within the
Queue Manager.
Explanation: The defined process will not be used because it is not referenced
as the process name by a local or model queue within the Queue Manager.
User Response: This message is only a warning. You can stop the message
from appearing by defining a local or model queue within the Queue Manager
that references the process on the Triggers settings page.
KMC0249E
The target queue not defined as local or remote queue within the Queue
Manager.
Explanation: The target queue name associated with this alias queue is not
defined as a local or remote queue within the Queue Manager.
User Response: Specify the name of a local or remote queue within the Queue
Manager as the alias queue’s target queue.
KMC0250W
The process is not referenced by a queue with triggering enabled within
the Queue Manager.
Explanation: The defined process will not be used because it is not referenced
as the process name by a local or model queue within the Queue Manager that
has triggering enabled.
User Response: This message is only a warning. You can stop the message
from appearing by defining a local or model queue within the Queue Manager
that references the process on the Triggers settings page and has triggering
enabled.
KMC0251E
The name list contains entry
@1
which is not defined as a queue on the
Queue Manager.
Explanation: An entry on the contents of the namelist is not defined as a queue
within the Queue Manager.
User Response: Ensure that each entry in the namelist contents identifies the
name of a queue on the Queue Manager.