Candle KLVHSKONCT GC32-9172-00 - Manual (Page 362)

362 Candle Products Messages Manual (KLVHS–KONCT)
KN3CV172 RESOURCE HAS NO SUBORDINATE RESOURCES
Explanation: A List action was selected for a resource that has no subordinate
resources.
System Action: None.
User Response: Check to be sure the action was entered next to the correct
resource.
Message Type:
Information.
KN3CV173 RESOURCE HAS ALREADY BEEN STARTED
Explanation: A Start action was requested for a resource that was already
started.
System Action: None.
User Response: Check to be sure the action was entered next to the correct
resource.
Message Type:
Information.
KN3CV174 RESOURCE HAS NPACOLL=NO AND CANNOT BE MONITORED
Explanation: A Start action was requested for a resource that has the
NPACOLL parameter set to NO in the NCP generation source. Data cannot be
collected for this resource.
System Action: None.
User Response: Only resources with NPACOLL=YES can be monitored. If
you want to monitor this resource, reset the NPACOLL parameter.
Message Type:
Information.
KN3CV175 RESOURCE IS NOT ACTIVE TO VTAM AND CANNOT BE MONITORED
Explanation: A Start action was requested for a resource that is not active in this
system’s VTAM. Inactive resources cannot be monitored.
System Action: None.
User Response: If you want to monitor this resource, activate the resource
under VTAM.
Message Type:
Information.
KN3CV176 RESOURCE NOT STARTED OR WAS ALREADY STOPPED
Explanation: A Stop action was requested for a resource that is not active or
was already stopped.
System Action: None.
User Response: Check to be sure the action was entered next to the correct
resource.
Message Type:
User input error.
KN3CV177 DELETE VALID ONLY FOR NCP TYPE RESOURCES
Explanation: A Delete action was requested on a resource other than an NCP.
Delete is valid only for NCPs.
System Action: None.
User Response: Check to be sure the action was entered next to the resource.
Message Type:
User input error.