Candle KLVHSKONCT GC32-9172-00 - Manual (Page 48)

48 Candle Products Messages Manual (KLVHS–KONCT)
KLVOP205 INCONSISTENT SPECIFICATION: NETNAME(netname)
ACBNAME(acbname) THROUGH(thru)
Explanation: An inconsistency was detected between the netname and thru, or
between the acbname and thru specified in the VSM command.
System Action: The command fails.
User Response: Correct the error and reissue the command.
Message Type:
ERROR.
KLVOP207 UNABLE TO OPEN VSM ACB: ACBNAME(acbname) NETNAME (netname)
ARG(arg)
Explanation: The CT/Engine VSM command was issued but one of the
following occurred:
1. A VTAM (OPEN) failed and a KLVVT001 error message indicating the cause
of the error is written to RKLVLOG.
2. The resource could not be defined.
3. The pre-open exit routine specified when the application was opened did not
complete successfully.
System Action: If the THROUGH parameter was specified, an attempt is
made to start the other virtual applications. In any case, the virtual application
indicated is unavailable.
User Response: Depends on the reason for the error.
1. Use the CT/Engine log and IBM’s ACF/VTAM Programming to determine the
cause for the OPEN failure and take appropriate corrective action.
2. Contact Candle Customer Support for possible reasons why the resource
could not be defined.
3. Contact Candle Customer Support to determine why the pre-open routine
exit did not complete successfully.
Message Type: ERROR.
KLVOP208 DEDICATE ATTRIBUTE SPECIFIED, LIMIT=l IGNORED
Explanation: The parameter LIMIT=l is specified on a VSM pool which also
specified DEDICATE. DEDICATE implies a limit of l.
System Action: CT/Engine ignores the LIMIT=l parameter.
User Response: Remove either the LIMIT=l or the DEDICATE parameter to
suppress this message.
Message Type:
REPLY.
KLVOP209 SESSLIM SPECIFIED IN A NON DEDICATE POOL IGNORED
Explanation: The parameter SESSLIM can be specified only on a DEDICATE
pool.
System Action: CT/Engine ignores the SESSLIM parameter.
User Response: Correct VSM definitions. See Customization and Operator’s
Guide.
Message Type:
REPLY.