Keri Systems EntraGuard Bronze Quick Start - Manual (Page 16)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 16 of 32
Quick S
tart Guide
Telephone Entry
5.3.2 Delete Entry Code
Entry codes can be deleted as required to prevent gate activation by that entry code. Perform the
following to delete an entry code.
1. Press .
2. Enter the desired three-digit entry code to delete – .
3. Press to delete the entry code. The unit emits a short, high-pitched tone to indicate the
deletion has been accepted. The unit emits a short, high-pitched tone followed by a low-pitched
tone if the deletion has been rejected.
EXAMPLE: Enter the following to Delete an Entry Code of “159.”
4. You can now enter another program command or press to exit programming mode.
5.3.3 Delete All Entry Codes
ALL entry codes can be deleted by this one command. Perform the following to delete all entry
codes and no longer allow gate activation by any entry code.
1. Press .
2. Press to delete all entry codes. The unit emits a short, high-pitched tone to indicate the
deletions have been accepted.
EXAMPLE: Enter the following to Delete All Entry Codes.
3. You can now enter another program command or press to exit programming mode.