Keri Systems EntraGuard Bronze Quick Start - Manual (Page 21)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 21 of 32
Telephone Entry
Quick S
tart Guide
EXAMPLE: Enter the following to set a Gate 2 Relay Timeout value of “45” seconds.
4. You can now enter another program command or press to exit programming mode.
5.3.12 Set Call Forwarding Phone Number
The Call Forwarding Phone Number allows you to enter the telephone number to be dialed by the
EntraGuard Bronze unit when you enable call forwarding. This telephone number can be up to 20
digits long. Typically this command is used when you will not be in the residence, but you still need
to be able to grant access to a visitor. When this feature is activated (see “Enable Call Forwarding”)
and a visitor requests entry, the EntraGuard Bronze will dial the call forwarding telephone number
instead of the residence telephone number. Perform the following to set the call forwarding
telephone number.
1. Press .
2. Enter the desired call forwarding telephone number – .
3. Press to lock in the call forwarding telephone number. The unit emits a short, high-pitched
tone to indicate the call forwarding telephone number has been accepted. The unit emits a short,
high-pitched tone followed by a low-pitched tone if the call forwarding telephone number has
been rejected.
EXAMPLE: Enter the following to set a call forwarding telephone number of “555 1212.”
4. You can now enter another program command or press to exit programming mode.