Keri Systems EntraGuard Bronze Quick Start - Manual (Page 2)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 2 of 32
Quick S
tart Guide
Telephone Entry
Figure 1: EntraGuard Bronze Mounting Holes and Wiring Knock-Out
Typical mounting hardware is #10 x 1 1/2 inch wood screws into wall studs or 3/16 inch fasteners
into masonry. Provide additional framing or a backing plate when mounting the unit to paneled or
dry-walled areas. The more secure the unit location and mounting, the greater the level of on-going
unit integrity.