Vermont Casting DVR33 - Manual (Page 20)

20
Vermont Castings, Majestic Products: DVR33
10004920
DVR33 Bracket Restricter Installation
Fig. 35 Baffle firebox assembly
NOTES: When installing DVR33 with a vertical
through-the-roof configured flue system,
the bracket restricter supplied with the
appliance (part# 10002910) should be
fitted to the appliance at installation.
For DVR33 numbers A12H00, A12I00,
A14A00 and A14B00 only, the restricter
plate for the vertical termination (part#
10003246) must be installed for vertical
runs over 20’ (6.1 m).
Fitting the Bracket Restricter
1. Remove the window glass/frame assembly. Locate
the baffle firebox assembly in the top rear of the
firebox (Fig. 35).
2. Remove the four (4) nuts along the front edge, and
the three (3) screws along the rear edge of the
baffle assembly. Remove the baffle assembly from
the firebox.
3. Remove the two (2) screws from the top face of the
baffle assembly (Fig. 36). Place the bracket
restricter as it is shown in Fig. 37, and secure it by
refitting the screws.
4. Refit the baffle assembly to the firebox,
replacing the three (3) screws and four (4) nuts.
5. Refit window glass/frame per the appropriate
sections.
Fig. 36 Top face of baffle assembly
Fig. 37 Assembling bracket restricter to baffle assembly
Baffle firebox assembly