Addendum to section 7: power management, Power management modes, Switching between clock sources – Maxim Integrated High-Speed Microcontroller Users Guide: DS80C390 Supplement User Manual
Page 100: Ower, Anagement, Odes, Witching between clock sources
Advertising
High-Speed Microcontroller User’s Guide: DS80C390 Supplement
100 of 158
ADDENDUM TO SECTION 7: POWER MANAGEMENT
The DS80C390 supports the general power management features of the DS87C520 described in the High-
Speed Microcontroller User’s Guide
. Exceptions are noted below.
POWER MANAGEMENT MODES
Power management mode 1 (PMM1) is not supported on the DS80C390.
SWITCHING BETWEEN CLOCK SOURCES
The ring oscillator on the DS80C390 is similar to that on the DS80C320. As such it does not support the
“run from ring” feature which allows the microprocessor to use the ring oscillator as a clock source after
the external crystal has stabilized (CKRY = 1).
Advertising