Novak Pit Wizard - Manual (Page 23)

23 PIT WIZARD INSTRUCTION MANUAL
SAVING PARAMETERS
Profiles that are created or uploaded can be saved into any of ten
(10) memory locations in the Pit Wizard by following these steps.
You can also keep a written record of the Profiles you make on the
Profile pages provided at the back of this manual.
Note: The new Profile will be stored in place of the previous Profile
that occupied the chosen memory location in the Pit Wizard.
1. Upload parameters from Cyclone or use the Edit Profile mode to
create a Profile to save, and return to the main menu.
2. Press the {MODE} button until you reach the Save Profile main
menu mode:
5 Save Profile
3. Press the {ENTER} button once to display the current memory
location number:
5 Save Profile
3
4. Press the {UP} or {DOWN} buttons to select the desired memory
location (0-9) that you want to store the Profile in.
5. Press the {ENTER} button to save the Profile. The display will
indicate that the Save procedure was successful:
5 Save Profile
Profile Saved
6. Press the {MODE} button to exit back out to the main menu.
You will advance to the next main menu option:
6 Monitor Trig