Novak Pit Wizard - Manual (Page 3)

3 PIT WIZARD INSTRUCTION MANUAL
INTRODUCTION
When designing an electronic speed control, the Novak engineers
are put to the task of setting design parameters such as how wide
the Deadband should be, what percentage of Full Drive should be
applied with the first pulse of transmitter information, or what
Brake and Drive Frequencies to use. In the past, our engineers would
determine the best possible compromise for these parameters
based on different vehicles and driving styles. While these fixed
designs were perfect for some applications and some drivers, they
were not right for others. It became clear that a speed control was
needed that allowed the driver to modify several of the design
parameters to fit their differing applications and needs.
During testing, our engineers found that different vehicles required
different parameter values, just as each individual driver required
different parameters to obtain the type of feel that they desired.
With this criteria in mind, Novak Electronics proudly brings you
the Cyclone Programmable Speed Control (Part #1765) and the
Pit Wizard Hand-Held Programmer (Part #1035).
WHAT’S INCLUDED
• PIT WIZARD
Comes complete and ready to program your Cyclone speed
control right at the track where you need it most. Just add
batteries, connect the D•LINK to speed control, and program.
Also comes with sample Profiles to start you on the right track.
• PROFILE SOFTWARE
The same customized profiling software that comes with the
Novak DataLink is already inside the Pit Wizard. Allowing you
to customize the adjustable parameters of the Novak Cyclone
Electronic Speed Control, including Deadband width, Minimum
Drive percentage, Drive & Brake PWM Frequencies, and more.