TechniSat TechniCorder ISIO STC User Manual
Page 13
13
When using an optional DVB-S tuner module for operation with four antenna signals:
h
Additional connection for LNB 3 to the LNB Input 3 on the DVB receiver.
i
Additional connection for LNB 4 to the LNB Input 4 on the DVB receiver.
When using an optional DVB-S tuner module for operation with one antenna signal:
h
Connection for LNB 1 to the LNB Input 3 on the DVB receiver.
j
Connection for the loop out to the LNB Input 1 (b) on the DVB receiver.
When using an optional DVB-C/T tuner module:
g
Cable connection (digital) and/or the DVB-T antenna connection with the RF IN
antenna input
on the DVB receiver.
k
Connection for the loop out with the loop IN (l) of the DVB-C/T tuner module.
The following references (a b c etc.) refer to the illustrations commencing on the previous
page onwards.