TechniSat TechniCorder ISIO STC - Manual (Page 38)

38
> You can view additional data about the current programme by pressing the INFO
button.
7.4.3.1 Selecting the channel
> You can now highlight the channel you want using the up/down arrow keys, the
page up/down keys and the numeric keypad.
> Press the OK button to select the highlighted channel.
7.4.3.2 Selecting a list
To make it easier for you to find channels, your device provides various channel lists. You
can select your Favourites lists (see section 13.1 of your operating manual)
and sort or filter the channels according to various criteria.
>
Press the OK button.
The active channel list is now displayed.
> Now use Options selection to open the desire channel list .
7.4.5 Calling up blocked channels
If a channel is selected that is blocked by the parental control function, the message
device PIN will be displayed on the screen.
> Use the numeric keypad to enter the PIN for your device.
The desired channel will be displayed.
or
>
Change to an unblocked channel as described in section 7.4.
If global parental control is enabled, the device PIN code will be requested again
when the blocked channel is switched on. To make things easier for you, you only
need enter the PIN code once during each operating phase.
When doing so, always pay careful attention to the information and settings for global
and user-dependent parental control (TechniFamily) in section 16.2 of the instruction
manual.
If the blocked channel involves an encrypted broadcaster, please also refer to section
9.5.3 in your operating manual.