TechniSat TechniCorder ISIO STC - Manual (Page 23)

23
The SMS keyboard is operated using the numeric keys on both the alphabetical and the
QWERTY keyboard and can be used at any time. The coloured buttons thus incorporate the
functions described above.
> Press one of the numeric pad keys 0 - 9 and select the various letters, numbers,
characters and symbols.
After first pressing a numeric key pad, the first letter of the corresponding row is
highlighted.
> The highlight then moves one field to the right with every additional press of the same
numeric key .
Press as often as necessary to reach the desired character. This will be added to the
entered term after a short delay.
The various numeric pad keys are assigned the following displayed letters, numbers,
characters and symbols.
0
:
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
Once you have reached the field you want with the highlight, you can then begin
selecting the next character immediately since, in this case, the character is directly
added to the term. If you wish to continue directly selecting a character from the same
numeric pad , you can add the previously highlighted character to the term by press-
ing the right arrow key.
5.5 Options selection
In some menus and operating modes (e.g. TV mode, music/images playback etc.), you have
the option of calling up additional functions and options via the options selection function.
>
Press the Options button in the lower right-hand corner of the screen.
In this example we can see the option selection for the channel list.