TechniSat TechniCorder ISIO STC - Manual (Page 42)

42
4: The current date and the current time.
5: Broadcasts of the displayed programme.
> Use the right/left arrow keys to adjust the display time either backwards or for-
wards.
The progress bar will also be moved backwards or forwards along the time bar
according to the display time.
> Use the yellow function key to switch directly to the display of the current or follow-
ing programmes.
> By pressing the up/down arrow keys it is possible to move the highlight from line
to line and to move upwards and downwards page by page by using the page up/
down keys.
> If further information is available on the highlighted programme, you can call this up/
exit it by pressing the Info button.
> Press the OK button to switch directly to the highlighted channel.
9 Timer recordings
Your device has the following timer functions:
1. DVR timer
Use this function to switch your digital receiver on and off, to record the selected programme
onto the selected recording medium while you are out as per section 11.4.1 in your operat-
ing manual.
If the receiver is switched on by the DVR timer, this will be indicated by l DVR Timer in
the display.
2. Video recorder timer
If the video recorder timer is selected, your digital receiver will be switched on and off for
the selected programme, allowing you to record programmes to an external recording unit,
e.g. a video cassette or DVD recorder, while you are out.
If the unit is switched on by the video recorder timer, this will be indicated by l VCR Timer
in the display.
3. Channel switching timer
If your receiver is in normal operating mode, it will switch to the programmed channel slot
at the set time.
4. Alarm
If your receiver is in standby mode, it is switched on when the programmed channel slot is
reached at the set time.
5. Series timer
To make it easier to find programmes, you can search for programme data highlighted in the
EPG using any terms. The series timer function is used to automatically generate ongoing
DVR timer settings for the programmes you find. Timer setting also continues after the EPG
data has been updated. This removes the need for repeated manual programming of timers,
e.g. to record episodes in a TV series.