TechniSat TechniCorder ISIO STC - Manual (Page 30)

30
> Use the up/down arrows to select whether you want to configure a LAN or WLAN
network and press the OK button.
> Now perform the network settings as described in section 8.5 of your operating man-
ual.
> Then press the Info button to accept the settings. The network configuration check
will now start again.
Channel search / ISIPRO
You have various options for searching for new channels or updating the channel list.
You can use the ISIPRO channel list function to download a new channel list for your receiv-
er from the satellite or run a channel search.
>
To download an up-to-date channel list, use the up/down arrow keys to high-
light the ISIPRO channel list update line.
> To download an available current channel list, use the up/down arrow keys to
highlight the ISIPRO channel list update line and start the process by pressing
the OK button.
The current channel list will now be downloaded via satellite.
> If, instead of updating the channel list, you wish to perform a channel search via sat-
ellite, or if the DVB-S reception signal has not been configured, use the up/down