Toa VM-3000 Series - Manual (Page 15)

15
Setting this to "Standby amplifier: Not used" sets the configuration to a system that does not use a standby
amplifier.
Available Settings Standby amplifier: Not used (default), Standby amplifier: Used,
BGM/PAGING System
Setting this to "Standby amplifier: Used" sets the configuration to a system that does use a standby amplifier.
In such cases, use a VP-2000 series amplifier as the VM-3000VA's standby amplifier.
6.1. System Type Settings
Select the type of VM-3000 system.